top of page
BOULEINAIR.jpg

Competition Petanque boule from Obut 

Welcome to our Competition boule pages. All our Petanque boule are approved for play by the F.I.P.J.P. All boule are supplied in sets of three boule with a jack and fabric sleeve and the prices below include delivery to the UK.

 

To make your selection, please choose which Petanque boule will be right for your play and also the size and weight as well as pattern you prefer. We accept orders over the telephone or by e mail. 

If you are unsure of the size and weight you require please contact us as we can provide a hand size chart in the post and offer assistance in selecting the right size and weight for you.

 

Regulation shooting boule sets and Junior Competition Boule are at the very bottom of this page

Semi Soft Steel boule.

2017Matchnoir.jpg

Art No, Match Noir £87.00 includes jack and boule sleeve as well as P+P

Obut Match Noir.  Super all round semi soft boule from Obut, soft enough to

shoot with but hard enough to withstand years of play with a hard coating on the surface to resist wear.  A natural step up from leisure boule, finished in black which will come off as you play. An all round semi soft carbon steel boule for shooters and pointers alike giving a minimum recoil.    Manufactured from a special steel, annealed to a low degree of hardness then temper treated to give a tough wear resistant surface.  3 year warranty (except the marks, which are caused by the clash due to the low degree of hardness).  Degree of hardness: Semi Soft. Agreement-signet of the FlPJP and weight are engraved.


Dia 71, 72, 73, 74, 75, 76 mm   

Weight 650 to 730grms available in increments of 10grms

Patterns available 0, 1.

Couxpattern.jpg

Soft Steel boule.

2016tonR.jpg

Art No. TON'R3     £140.00 includes Jack, Sleeve as well as P+P 

TON'R.  A fine very soft steel shooters boule giving a minimum recoil  performing well in all situations giving you a great advantage. Manufactured from a soft steel, Precision Balanced and one of the softest carbon steel boule we sell at 110kg/mm2 which prevents the boule from rebound when hitting, Finished in Black / Grey blue which will come off during use. 
3 year warranty (except the marks, which are caused by the clash due to the low degree of hardness).  Degree of hardness: Soft. Agreement-signet of the FlPJP and weight are engraved. 

Available in sizes 71, 72, 73, 74, 75 and 76mm 

Weights range from 650grms to 730 grms in 10 grm intervals.

Patterns available 0 and 1

2021TonRpatterns0to1.jpg

Semi Soft Steel boule.

2014MatchPlus.jpg

Art No. Match Plus   £180.00 includes Jack, Sleeve as well as  P+P
Obut Match +.  Obut supply three boule with the + Hardness and this is one of them. These boule are created using steel with a high internal resistance and a tempering process unique to Obut. This gives a reduced resonance in the boule so it can absorb shocks. It behaves like a very soft boule but with a level of wear you would associate with a traditional semi soft boule. This makes them perfect for pointing and shooting. Great middle boule from Obut, soft enough to shoot but also great for pointing.  An all round semi soft carbon steel boule for shooters and pointers alike giving a minimum recoil.    Manufactured from a special steel, annealed to a low degree of hardness. Finished in black.  3 year warranty (except the marks, which are caused by the clash due to the low degree of hardness).  Degree of hardness: Semi Soft.

Agreement-signet of the FlPJP and weight are engraved.
Dia 71, 72, 73, 74, 75, 76    Weight 680 to 730grms available

in increments of 10grms   

Patterns available 0 and 2

​

2021MatchPluspatterns0to2.jpg

Semi Soft Stainless Steel boule.

Art No.Match IT     £144.00 includes  Jack, Sleeve as well as P+P 

Obut Match IT. Semi Soft stainless steel pointer and shooters boule that performs superbly in all roles of competition. Manufactured from the highest quality stainless steel with 115kg/mm hardness. Precision Balanced, Annealed to a low degree of hardness to give remarkable anti-rebound characteristics but resistant to wear. Satin finished to give a great grip.  3 year warranty (except the marks, which are caused by the clash due to the low degree of hardness). Degree of hardness: Semi Soft. Agreement-signet of the FIPJP and weight are engraved. 
 

Dia 71, 72, 73, 74, 75, 76

Weight from 650 to 730 grms available in increments of 10grms

Patterns available 0 and 1

Soft Stainless Steel boule.

2021MatchIT.jpg
Obutpatterns0to1.jpg
2021Soleil.jpg

Art No.Soleil 110     £194.00 includes Jack, Sleeve as well as P+P 

Soleil 110 Inox. Soft stainless steel shooters boule that performs superbly in competition. Manufactured from the highest quality stainless steel and annealed to a low degree of hardness to give remarkable anti-rebound characteristics. The softest Stainless steel boule available at 110kg/mm. The beauty of this boule is the blend of the quality of stainless with the softness to perform when shooting or pointing to absorb the impact.  Precision Balanced and finished in natural stainless.  3 year warranty (except the marks, which are caused by the clash due to the low degree of hardness). Degree of hardness: Soft. Agreement-signet of the FIPJP and weight are engraved.

 
Dia 71, 72, 73, 74, 75 and 76mm                                

Weight from 650 to 730 grms available in increments of 10grms

Patterns 0 and 1

Soleilpatterns.jpg

Semi Soft Steel boule.

2015CXCOU.jpg

Art No. CXCOU   £221.00 includes Jack, Sleeve as well as P+P   
CX Cou Great all round boule from the Cou range. Soft carbon steel boule for shooters and pointers alike giving a minimum recoil but also its outstanding balance ensures a straight line when throwing and rolling.  Finished in a black satin which will wear off during play. The grip is superb and comes in increments of 10 grms  3 year warranty (except the marks, which are caused by the clash due to the low degree of hardness).  Degree of hardness: Semi Soft. Agreement-signet of the FlPJP and weight are engraved.

 

Dia 71, 72, 73, 74, 75 and 76mm

Weight 650 to 750grms available in sizes given in 

increments of 10grms 

Patterns available 0 and 1.

Couxpattern.jpg

Semi Soft Steel boule.

2014RCC.jpg

Art No. RCC     £212.00 includes  Jack, Sleeve and P+P 

OBUT RCC.  

Designed for the modern Petanque game and performance, the RCC (rebound control carbon alloy steel), this is one of the latest generation of high range competition from Obut. It is a boule using the latest concentration of new metallurgical technologies. This cutting edge development has allowed Obut to use a new carbon steel alloy and adapt a new concept specific to petanque boule manufacture.

 

The results give an incomparable capacity to absorb and cushion an impact, especially on very hard ground, during a high lob and a shooting boule to boule, its very special precise heat treatment process, gives the RCC three additional qualities desired by petanque players.

​

Perfectly balanced with a satin black shot peen finish

Stays smooth for use and is pleasant to the touch.

Keeps soft boule characteristics even after intensive use.

Gives great performance with surprisingly little time to get used to the boule and its characteristics. Loves attacking on difficult terrain.

RCC from Obut feels great from the first touch and the wear on the surface is mastered and gives controlled recoil

 

3 year warranty (except the marks which are caused by the 

clash due to low degree of hardness). Agreement signet of the 

FIPJP and weight are engraved. We do not stock these boule as the RCC are made for you to your exact specifications.

​

Dia 72, 73, 74, 75, 76 mm

Weight from 680 to 710 grms in 10 grm intervals

2021Pattern0web.jpg

Semi Soft Stainless Steel boule. 

2022SuperInoxBouleweb.jpg

Art No.SuperInox     £215.00 includes  Jack, Sleeve as well as P+P 

Obut SuperInox. Semi Soft stainless steel all round pointer and shooters boule that performs superbly in all roles of competition. Manufactured from the highest quality stainless steel with 115kg/mm hardness. Precision Balanced, Annealed to a low degree of hardness to give remarkable anti-rebound characteristics but resistant to wear. Suitable for hard terrains. Satin finished to give a great grip.  3 year warranty (except the marks, which are caused by the clash due to the low degree of hardness). Degree of hardness: Semi Soft. Agreement-signet of the FIPJP and weight are engraved. 
 

Dia 72, 73, 74, 75, 76

Weight from 680 to 710 grms available in increments of 10grms

Patterns available 0

Semi Soft Stainless Steel boule.

2021Pattern0.jpg
2015ATX.jpg
Obutpatterns0to1.jpg

Art No. ATX     £315.00 includes Jack, Sleeve and P+P  
OBUT ATX.  The choice of Specialists. Manufactured to your exact requirements from very high quality special stainless steel. Shot peened finish. This boule is so precision balanced the individual boule only vary 2 grams between the set of three. Each boule is made to 20 hundredths of a millimetre to your chosen diameter. Balanced to 0.5% of the weight of the boule.  Anti rebound boule performing as shooter or pointer on all surfaces. Degree of hardness: Semi Soft. Can be engraved with your name if required. 3 year warranty (except the marks which are caused by the clash due to low degree of hardness). Agreement signet of the FIPJP and weight are engraved. 
Required special to order manufacture and is not available from stock. We do not stock these boule as the ATX are made for you to your exact specifications.

 

Dia 71, 72, 73, 74, 75 and 76 mm

Weight 650 to 750grms available in increments of 10grms 

Patterns available 0 and 1.

​

Specialist Boule.

Most of the boule types above are stocked in our Petanque shop in Bardwell but some sizes, weights and patterns may not be available due to the massive range of options. We carry the largest stock of Competition boule in the UK. However, if we do not have the right boule for you we can usually deliver 4 weeks after your order.

Most boule can be delivered from stock within 5 working days. The last two boule above are special to order boule and are not carried in stock although we do have samples so you can see the finish etc to make your selection

Junior Competition boule for under 11's

2016minimes.jpg

Match Minimes Ref M3MINIME £75.99

Junior competition boule for under 11's  The set of three boule are a great introduction to the sport for children

High specification competition boule from the Obut Match design. 

These boule are ideal for serious junior players.  


Black finish and made to a high standard

and are available in a Diameter of  65 mm.

Two patterns T and O which is Plain. 

Weight 600 Grms  

1 year warranty Hardness 120 kg/mm2

2021patternsmatchminimies.jpg

Regulation Shooting target set

2021TirBouleWeb.jpg

Obut Regulation Shooting target set

The regulation shooting boule are 74mm diameter and 700 grams in weight. The required sizes to use in the FIPJP shooting discipline. Two black boule are the obstacles and the silver boule is the target. Supplied with jack and instructions.

£75.00

Boule care and Boule engraving.

Boule Engraving.

Obut Boule Engraving. All semi soft and Soft boule can be engraved with your name ( up to 15 Characters ) or your initials. This process is carried out at the factory subject to FIPJP conditions so will not be available from our usual UK stock. The boule are taken out of the standard production process and so may take up to 6 weeks longer to deliver to you than our normal stock boule

The engraving can be a single letter up to 15.

​

Obut Boule Name Engraving. This engraving is for 1 to a maximum of 15 characters. 15 characters are only available on the boule with limited striations i.e. 0 on soft and semi soft boule.   Limited to 6 Characters on other double striations. 

Available on Obut semi soft and Soft boule  Sample shown right.

 

Ref N £21.00 per set

Please state at time of ordering

​

​

2017bouleinitialsdan.jpg
bottom of page